Cathodic Protection of the Water main System

Information for affected homeowners

Every year the Region of Durham Works Department schedules Cathodic Protection installation in selected areas of the region. Work typically takes place between early June through to early September each year. Once started, the installation process takes between 48 hours and 1 week to complete. Affected homeowners are notified directly by way of newsletter.

For affected homeowners, please note the following:

Cathodic Protection of the Water main system greatly reduces the extent of corrosion damage to the Water main. It lengthens the life of the Water main by many years and reduces service interruptions caused by corrosion breaks, and eliminates the need for re-construction and the interruptions associated with it.

Cathodic Protection of a Water main is a process by which a 14.5-kg sacrificial magnesium anode is attached to the water main. This allows any corrosion to take place on the anode and not on the Water main.

The anode is attached by auguring down to the Water main and spot-welding it to the Water main.

The plastic "Test Stations" seen in certain locations are used to monitor the effectiveness of the anodes. They will have a sticker on them with a phone number for you to call if they become damaged or you have any concerns.

Thank you for your patience and co-operation.

After hours construction emergency calls should be directed to 905-576-9991

Questions?

Should you have any questions, concerns or require further information regarding Cathodic Protection installation, please contact the on-site Region of Durham Inspector.

Regional Municipality of Durham:
Chris Holoway, Operations Technician
Project Coordinator
Phone: 905-668-7711, ext. 3410
Cellular: 905-260-0913
Email: TechSupport@durham.ca

Durham Region Works Department
605 Rossland Rd. E., Whitby, ON
Phone: 905-668-7711 or 1-800-372-1102
www.durham.ca